8-5
8
8 * Wheel hub bearings
• Check for looseness or damage, and replace if
necessary.
√ √√√
9 * V-belt
• Check for wear, cracks or other damage, and re-
place if necessary.
√ √√√
10 * Chassis fasteners
• Make sure that all nuts, bolts, and screws are
properly tightened.
√√√√√
11 *
Shock absorber as-
semblies
• Check operation and correct if necessary.
• Check for oil leakage and replace if necessary.
√√√
12 * Stabilizer bushes
• Check for cracks or other damage, and replace if
necessary.
√√√
13 * Rear knuckle pivots • Lubricate with lithium-soap-based grease. √√√
14 * Steering shaft • Lubricate with lithium-soap-based grease. √√√
15 * Steering system
• Check operation and repair or replace if damaged.
• Check toe-in and adjust if necessary.
√√√√√
16 * Engine mount
• Check for cracks or other damage, and replace if
necessary.
√√√
17 * Axle boots
• Check for cracks or other damage, and replace if
necessary.
√√√√√
18 Engine oil
• Change.
• Check ATV for oil leakage, and correct if neces-
sary.
√ √√√
19
Engine oil filter car-
tridge
• Replace. √√√
NO. ITEM
CHECK OR MAINTENANCE
JOB
INITIAL EVERY
Whichev-
er comes
first
month136612
km
(mi)
320
(200)
1300
(800)
2500
(1600)
2500
(1600)
5000
(3200)
hours 20 80 160 160 320
U28P10E0.book Page 5 Thursday, April 10, 2008 9:29 AM
