8-6
8
8 *
Upper and lower
arm pivots
• Lubricate with lithium-soap-based grease. √√√
9 * V-belt
• Check for wear, cracks or other damage, and re-
place if necessary.
√ √√√
10 *
Drive shaft univer-
sal joint
• Lubricate with lithium-soap-based grease. √√√
11 * Chassis fasteners
• Make sure that all nuts, bolts, and screws are
properly tightened.
√√√√√
12 *
Shock absorber as-
semblies
• Check operation and correct if necessary.
• Check for oil leakage and replace if necessary.
√√√
13 * Stabilizer bushes
• Check for cracks or other damage, and replace if
necessary.
√√√
14 * Knuckle pivots • Lubricate with lithium-soap-based grease. √√√
15 * Knuckle shafts • Lubricate with lithium-soap-based grease. √√√
16 * Steering shaft • Lubricate with lithium-soap-based grease. √√√
17 * Steering system
• Check operation and repair or replace if damaged.
• Check toe-in and adjust if necessary.
√√√√√
18 * Engine mount
• Check for cracks or other damage, and replace if
necessary.
√√√
19 * Axle boots
• Check for cracks or other damage, and replace if
necessary.
√√√√√
20 Engine oil
• Change.
• Check ATV for oil leakage, and correct if neces-
sary.
√ √√√
NO. ITEM
CHECK OR MAINTENANCE
JOB
INITIAL EVERY
Whichev-
er comes
first
month136612
km
(mi)
320
(200)
1300
(800)
2500
(1600)
2500
(1600)
5000
(3200)
hours 20 80 160 160 320
U1P113E0.book Page 6 Friday, May 19, 2006 9:10 AM
