MAINTENANCE
Maintenance Item
Check Vac Hose Connections
Clean the Squeegee Blades
Inspect Brush or Pad
Before Starting
the Work Period
Daily Weekly Monthly Annually
*
*
*
End of Work
@
Period
Inspect power cord for wear
Before Storing
*
NOTE:
Drain
&
Rinse Tanks
*
Inspect Vac Fan
Foam
Breaker
I*I
I I
I
Remove the BrushPad
Check
the
BrushLPad for Damage and or wear
Clean Squeegee Blades
&
Foam Breaker
*
*
*
Remove lint build
-
up
from
screen in the recovery tank well.
Remove tank lid and allow recoverv to
drv
between uses.
Raise Squeegee Assembly
I*I
I I I
*
*
Inspect Tanks and Hoses
Inspect all Motors for Carbon
Motor Brush wear.
*
*
Check Solution Strainer
I
I*I
I
I
Check Casters
&
Wheels for proper lubrication
I
I*I
I
I
7.
2.
2.
Details on these maintenance items can be found on the following pages.
This cable will lay on wet surfaces. To prevent electrical shock immediatly
replace cords with frayed or cracked insulation.
Periodically inspect the recovery tank and decontaminate if necessary,
using a Hospital Grade
Virucide or a
7
-
70
bleach to water solution.
Wastewater should be disposed of properly.
Occasionally check in line filter screen, rinse with hot water if necessary.
Frayed or cracked hoses should be replaced to avoid vacuum or solution
pressure loss.
3.
4.
LUBRICATION:
The following symbols are found throughout the manual indicating the items
requiring lubrication:
@
Apply Grease
Use Spray Lubricant.
Thread Locker (Red or blue).
EXAMPLE:
Use Anti
-
Seize when repairing.
TCZOE
98447 7/1/97
7
