INSTALLATION INSTRUCTIONS
for Your Air Conditioner
Unpack the mounting parts that came with your air conditioner to determine which
window installation instruction you should follow.
If you have these parts,
follow:
INSTRUCTION 1
(below).
If you have
these parts,
follow:
INSTRUCTION
(on page 8):
Installation
Instructions
1
,
l
Unpack mounting parts before installing your air
conditioner. Make sure you have all the necessary
parts (see Figure 3). A normal installation can be
made with a screwdriver, saw, small level, pocket
knife, tape measure, drill and %“, 9&” and 3/16”
drill bits.
CAUTION:
l
Be sure air conditioner does not fall out of
window during installation.
l
Handle the air conditioner with care,
Watch out for the sharp metal fins on
the front and rear coils.
l
Do not use the collected water for drinking
purposes. It is not sanitary.
1
Shelf (1)
6A screw -
10 x 1% in. (2)
i
Support Bracket (1)
7
Screw - 9 x %-in. (51
Sill Bracket (1)
Side Seal Strip (1)
4
5/16-in. bolt (2)
ii
Lower Track Seal (1)
4A 5/16-m. nut (2)
10 Locking Bracket (1)
48 5/16-in. flat washer (2) 11 Foam Seal Strip (1)
4C 5/16-in. lockwasher (2) 12 Panel Frame (1)
5 Translucent Panel (1)
13 Thread Cutting Screw
6
Screw - 10 x l-in. (21 #6/32 x %-in. (41
Description of Parts
If using Item 13 for fastening Item10 or 12 to metal or
plastic, use 9/64-in. die. or #26 drill.
