5. When the oven temperature goes above
normal baking/roasting temperatures, the
door cannot be opened and the Lock Lever
must not be moved.
6. After the Self-Cleanlng cycle is completed
and the oven has cooled sufficiently, the
Lock Lever can be moved back to the left. DO
NOT FORCE IT. Wait until it moves easily.
Turn the Oven Selector and Oven Tempera-
ture Control Knob to OFF.
7. After the oven is cool, wipe off any residue
or ash with a damp cloth. If needed, touch up
spots with a soapy steel-wool pad.
To stop the Self-Cleaning
cycle before cycle is
completed:
Turn the Oven Selector and Oven Temperature
Control Knob to OFF. When the oven has cooled
sufficiently, move the Lock Lever back to the left.
DO NOT FORCE lT. Wait until it moves easily.
To cancel the Self-Cleaning
cycle before cycle starts:
Turn the Oven Selector and Oven Temperature
Control Knob to OFF. Push the Start Time button
twice. Move the Lock Lever back to the left.
Special tips
l
Keep the kitchen well ventilated during the Self-
Cleaning cycle to help gel rid of heat, odors and
smoke.
l
After the oven is cool, wipe up any residue or
ash with a damp cloth or sponge. If any spots
remain, clean with a mild abrasive cleanser or
mildly abrasive pad.
. Clean the oven before it gets heavily soiled.
Cleaning a very soiled oven takes longer and
results in more smoke than usual.
l
If the Setf-Cleaning cycle does not get the oven
as clean as you expected, the cycle may not
have been set long enough or you may not
have prepared the oven properly. Set the Self-
Cleaning cycle longer the next time and hand-
clean areas noted on page 19.
21
