Exterior moisture control
The Exterior Moisture Control operates
electric heaters around the door openings.
These heaters help keep moisture from
forming on the outside of the refrigerator
cabinet.
l Use the OFF setting when humidity is low.
l Use the ON setting if moisture forms on
the outside of the refrigerator cabinet.
ExlmoRYdlsTllRE~
-117171
ON
Changing the control settings
If you need to adjust temperatures in
l Adjust the Refrigerator Control first.
refrigerator or freezer, use the settings listed
l Wait at least 24 hours between adjust-
in the chart below as a guide. If you have
ments.
questions, call our Consumer Assistance
Center number. (See page 23.)
l Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION:
REASON:
CONTROL SElTlNGS:
If Refrigerator
Door opened often
Refrigerator 6
Section is Large amount of food added
Freezer
D
TOO WARM
Room temoerature too warm
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Refrigerator 4
Freezer
A
If Refrigerator
Section is
TOO COLD
Controls not set correctly
Refrigerator 2
for your conditions
Freezer
A
If ICE isn’t
MADE FAST
ENOUGH
Heavy ice usage
Very cold room temperature
Ican’t cvcle often enouohl
Refrigerator 4
Freezer
A
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator 6
Freezer C
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
8
