A SERVICE OF

logo

4.23 LCD unit 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-101
7. Make the brake hinge R flat.
8. Set the LCD mask to the LCD assembly while engaging the latches.
NOTE: When setting the LCD mask, be careful not to pinch the harnesses.
9. Secure the LCD mask with the following screws.
M2.5×5B FLAT HEAD screw ×2
10. Stick the LCD mask cushions in place.
NOTE: When replacing the LCD mask with a new one, stick the camera panel in place.
11. Set the LCD assembly to the guides of the cover assembly and secure them with the
following screws.
M2.5×5B FLAT HEAD screw ×4
Do not pinch the harnesses.
Do not pinch the harnesses.