A SERVICE OF

logo

4.16 Sound Board/Touch Pad holder 4 Replacement Procedures
4.16 Sound Board/Touch Pad holder
4.16.1 Sound Board
Removing the Sound Board
To remove the sound board, follow the steps below and refer to figure 4-23.
1. Remove the following screw and the sound board.
M2.5×6B FLAT HEAD screw ×1
2. Disconnect the sound board I/F cable from the connector on the sound board.
3. Peel the insulator.
Sound board
M2.5
×
6B FLAT HEAD
Insulator
Sound board
I/F cable
Figure 4-23 Removing the sound board
Satellite M30-35 Maintenance Manual (960-455) 4-43