UPS Connections
Standard Unit with 208/240V Input, 120/240V Output Transformer Module
The figures below show the standard unit, consisting of one electronics module and one battery module, with the addition of
the 208/240V input, 120/240V output transformer module. The modules do not have to be stacked for the unit to operate;
however, if the modules are to be stacked please refer to the 1700 Series user manual for instructions on interlocking
modules.
To connect the modules electrically follow these steps:
Plug the gray power cord coming from the transformer
module (labeled “Input from UPS”) into the gray 20A
outlet on the back of the electronics module
Plug the black power cord coming from the electronics
module into the matching outlet on the back of the
transformer module (labeled “Output to UPS”).
Plug the blue battery connector coming from the
battery module into the matching blue connector on
the electronics module.
Plug the black power cord coming from the
transformer module (labeled “Input Power”) into the
power source intended to supply power to the unit.
Step 1 Step 2
Step 3 Step 4
