A SERVICE OF

logo

10
Command Description Argument 1 Argument 1 Description Argument 2 Argument 2 Desc Argument 3 Arg 3 Desc
01 Standby 0 Main standby 0 Put unit in standby
0 Main standby 1 Take unit out of standby.
02 Status 0 Return amplifier status.
The RS232 can be set using a hardware jumper to automatically send changes to the RS232 port.
Five bytes will be returned, the fifth byte contains no information.
Status Byte # Byte Description bit Value Description
1 Standby 0 Main bus (1 = activate, 0 = standby)
2 Temperature 0 Channel 1
1 Channel 2
2 Channel 3
3 Channel 4
4 Channel 5
3 Fuse Plus Rail 0 Channel 1
1 Channel 2
2 Channel 3
3 Channel 4
4 Channel 5
4 Fuse Minus Rail 0 Channel 1
1 Channel 2
2 Channel 3
3 Channel 4
4 Channel 5
5 none all bits = 0