TASCAM CD-RW402 Quick Start guide
2 Turn the MULTI DIAL to select the TOC edit-
ing options, and push it to carry out the
operation.
Sometimes you may need to confirm the
operation by pressing the
MULTI DIAL again.
3 Divide a track into two at the current
position.
4 Combine two tracks.
5 Erase a track from the TOC
6 Move the start of the track or the end of the
track to the current playback position.
7 Return the disc to “normal” by ejecting it, or
the ALL CANCEL menu option (when the drive
is stopped.
Analog and digital source volume
1
When recording from an outside source on
drive 2, use the
INPUT SELECTOR to choose
between the digital
COAXIAL or OPTICAL con-
nectors, the
ANALOG connectors, or INTERNAL
(drive 1).
2 Adjust the level of analog signals (and their
balance) using the
INPUT and BALANCE
controls.
3 Use the REC MENU 1 menu to select the digital
volume to set the level of all signals (analog
post-step 2, and digital).
Adjust the level between -
60 and +18 dB
(there is also an “off” setting, shown by ---).
TOC EDIT
Track 2 Track 2 Track 3
DIVIDE
Track 5 Track 6 Track 5
COMBINE
Track 9
Track 10 Track 11
Track 10Track 9
ERASE TRACK
Track 5 Track 5
StartPt SET
Track 5 Track 5
End Pt SET
ALL CANCEL?
REC MENU 1 DIG VOLUME
