A SERVICE OF

logo

Control Panel Assembly
1 Mains cable entry
The main supply cable for the TS690R must
enter the control panel via this entry point.
2 Main PCB
The main Printed Circuit Board (PCB).
3 Display
A back lit 8 character Starburst LCD.
4 Loudspeaker
The internal sounder for the TS690R. It is
located underneath the main PCB.
5 Radio Module
Radio receiving module. DO NOT adjust the
trimmer on the module.
6 Aerial
Radio receving aerial. The aerial must
positioned as shown when refitting the PCB.
7 Standby Battery
A 2.1 Amp Hour (Ah) battery must be fitted
inside the TS690R in order to maintain the
system in the event of a mains power failure.
8 Mains Transformer
The mains transformer which transforms the
incoming mains supply down to 18V a.c.
9 Mains Fused Terminal Block
The mains connection terminals for the
TS690R. The terminal block is fitted with a
200mA fuse.
8
System Installation TS690R Installation Manual
+
-
Battery
2.1 Ah max.
1
8
9
6
7
2
3
5
4
Figure 2. TS690R Control Panel Layout