OPERATION AND ADVANTAGES (CONT.)
IMPORTANT SAFETY INSTRUCTIONS
The 3 in 1 Family Thermometer is supplied with two AAA batteries.
Replace with new batteries when the low battery symbol appears
Remove the battery cover by
depressing tab and opening.
Remove old batteries and replace
with new ones. Snap battery cover
89.6°F ~109.2°F (32°C ~42.9°C)
Predict mode: 5 seconds in rectal
Regular mode: 10 seconds in rectal
Comply with ASTM E1112-00 and
89.6°F ~109.2°F (32°C ~42.9°C)
89.6°F ~109.2°F (32°C ~42.9°C)
Comply with ASTM E1112-00 and
Comply with ASTM E1112-00 and
Predict mode: 5 seconds in rectal
Regular mode: 10 seconds in rectal
Predict mode: 5 seconds in rectal
Regular mode: 10 seconds in rectal
1. Green light is on when the reading is
2. Red light is on when the reading is
1. Green light is on when the reading is
2. Red light is on when the reading is
1. Green light is on when the reading is
2. Red light is on when the reading is
Users will be able to recall the last 10 readings when entering the
recall mode, enabling tracking of temperature variation in a more
A beeper works to indicate readiness for use and end of a
The temperature scale can be switched from Celsius to Fahrenheit and
This device detects which probe is used and displays the the body site
Never use the thermometer for purposes other than body
temperature measurement. Please follow the safety precautions
when using in on children.
• Always clean the thermometer probes before and after each use.
• Never immerse the thermometer or probes in water or other liquids
(not waterproof). For cleaning and disinfecting, please follow the
instructions in the “Cleaning and Storage” section of the instructions.
• Keep the thermometer and probes away from direct exposure to the
sun and keep in a dust-free, dry area at a temperature between
• Do not use the thermometer if there are signs of damage on the
probe tips or the thermometer itself. If damaged, do not attempt to
repair the thermometer! Please contact Summer Infant’s Consumer
• This 3 in 1 Family Thermometer consists of high-quality precision parts.
• Do not drop the instrument! Protect it from severe impact and shock.
• Avoid the soft tips more than 45°.
• Avoid ambient temperature above 140°F (60°C).
