3
SECTION 2
INSTALLATION INSTRUCTIONS
2.1 SAFETY PRECAUTIONS
Do not attempt to operate the freezer until the safety
precautions and operating instructions in the manual
are read completely and are thoroughly understood.
Take notice of all warning labels on the freezer (see Fig-
ure 2).The labels have been put there to help you main-
tain a safe working environment. The labels have been
designed to withstand washing and cleaning. All labels
must remain legible for the life of the freezer. Labels should
be checked periodically to be sure they have not been
painted over, rubbed off, fallen off, and can be recognized
as warning labels.
If you are in need of replacement labels, indicate the part
number, type of label, location of label, and quantity re-
quired along with your name and address and mail to:
Stoelting, LLC
Commercial Products
502 Hwy. 67
Kiel, WI 53042
Figure 3. Warning Label Locations
THERMISTOR. HEAT SINK MUST BE
SEE SERVICE MANUAL.
USED WHEN BRAZING ON EVAPORATOR
OUTLET. CHECK RESISTANCE BEFORE
REMOVAL OF THERMISTOR.
UNDER THIS COVER. TEMPERATURE
MUST NOT EXCEED 220°F NEAR
HEAT SENSITIVE THERMISTOR LOCATED
