5
XC-E series
LOCATION OF PARTS AND OPERATION
1 Lens mount section (C mount)
A commercial C-mount lens as well as a
Sony standard lens can be used.
2 Camera mounting reference hole
(top)
These screw holes are positionned with
high precision related to CCD sensor.
3 Camera mounting reference
hole/Screw hole for tripod
adaptor mounting (bottom)
4 12-pin multi-connector
DC IN/HD/VD (DC power/sync signal
input) VIDEO OUT terminal
5 75 Ω termination selector switch
6 HD/VD input-output selector
switch
7 Shutter speed/mode setting DIP
switch
Switches 1 to 4:
Select the shutter speed.
Switch 5: Selects the frame or field
integration.
Switches 6 to 8:
Select the trigger shutter
mode.
Switch 9: Selects
γ
correction on/off.
Switch 0: Selects the gain.
8 Volume control switch
This switch can be changed in the
range of Switch 0 to 18 dB when the
GAIN switch is set to “M”.
*During factory setting, this switch is
adjusted to the mechanical center.
n
When setting DIP switch 5 to the frame
integration, set the volume control
switch 8 to the MAX side from the
mechanical center (because of CCD
characteristics).
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
GND
+12 V
GND
VIDEO output
GND
External HD input
*
1
External VD input
GND
–
*
2
WEN output
TRIG input
GND
External HD/VD
synchronization
Internal HD/VD
synchronization
GND
+12 V
GND
VIDEO output
GND
Internal HD output
Internal VD output
GND
–
*
2
WEN output
TRIG input
GND
*
1: An input VD signal is required when the restart/reset mode is used.
*
2: A WEN output signal is valid only in the external trigger shutter mode.
Corresponding
No.
5
6
7
8
75 Ω termination selector switch
HD/VD input-output selector switch
Shutter speed/mode setting DIP switch
Switches 1 to 4: Select the shutter speed.
Switch 5: Selects the frame or field integration.
Switches 6 to 8: Select the trigger shutter mode.
Switch 9: Selects correction on/off.
Switch 0: Selects the gain.
Volume control switch
Factory-setting
mode
Mechanical
center
ON
EXT
OFF
FRAME
Normal
OFF
Manual
XC-ES50/50CE . XC-ES30/30CE
XC-EI50/50CE . XC-EI30/30CE
4
12-pin multi-connector
• Factory-setting mode of rear panel
1
3 3
4
4
5 6
7
8
2
2
Switch
