18
4 Set the POWER switch to CHG.
The display window of the remote control and the indicators
display as follows while charging:
Remote Control Display POWER Indicator
Charging CHARGE
1)
/e Flashes orange/green
rr
CHARGE
1)
/r Flashes orange/green
rr
CHARGE
1)
/t Flashes orange/green
rr
CHARGE
1)
/y Flashes orange/green
Fully charged for use FULL/u Flashes or off
2)
1) “CHARGE” and the approximate remaining charge time appear alternately. The
remaining charge time is displayed with a minus sign.
Example: -0:46 indicates the battery will be fully charged in about 46 minutes.
2) The POWER indicator turns off about one hour after u appears on the remote
controller display. When the POWER indicator turns off, the battery is fully
charged.
CAUTION
The battery does not charge when the POWER switch is on: it must be set to CHG.
Note
A fully discharged battery pack requires four to five hours to completely recharge.
5 When charging is finished, turn the POWER switch off and
disconnect the AC adapter.
Display
