Basic Operations
10
EN
5
Make sure you have preset radio stations.
(See page 7 for presetting.)
Press POWER to turn on the CD Receiver.
Press TUNER FM/AM.
Press TUNE MODE repeatedly until “PRESET” appears in the
display.
Press PRESET +/– to select the preset code you want (A1 – C0).
Setting the FM mode manually
Press ST/MONO to choose the reception mode, select either Auto
Stereo or MONO.
• Auto Stereo mode receives stereo broadcasts with strong signals.
Press ST/MONO repeatedly until “MONO” disappears from the
display.
• MONO mode receives stations with weak signals. Stations will be
received in monaural but with even less noise.
Receiving Preset Stations
1
2
235
3
4
ST/MONO
4
POWER
OPEN/CLOSE
CD
TUNER TAPE
FM/AM
PRESET TIMER DISPLAY
VOLUME
MIN MAX
PLAY MODE REPEAT SET ENTER ST/MONO MEMORYTUNE MODE CHAR PTY – RDS – EON
A – SPEAKER – B LOUDNESS
MIN MAX MIN MAX L R
BASS TRE BAL
PHONES
CD TIMER TUNER
( CLOCK SET )
• To tune in a non-preset station,
see “Presetting Radio Stations”
on page 7 for Automatic or
Manual Tuning.
Notes
• If no stations are stored, “No
Preset” flashes in the display.
If only one station is stored, “1
Preset only” flashes.
• The display shows only the
preset codes where you have
stored the stations beforehand.
Example: If you have stored
the stations onto A1, A3 and
C2, the display changes as
follows each time you press
the PRESET + button.
” A1 ” A3 ” C2
