81
Volume cannot be
turned up.
• AVLS is on.
, Set AVLS to “AVLS OFF” (page 72).
An MD is not
played normally.
• Playback mode is changed.
, Use the jog dial on the recorder or press RPT/ENT on the
remote control to change back to the normal play.
An MD is not
played from the
first track.
• Disc playing stopped before it came to the last track.
, Press N for 2 seconds or more to start playing, or press the
control towards . repeatedly on the remote.
• The group mode is turned on.
, Turn the group mode off and play from the first track (press N
for 2 seconds or more to start playing, or press the control
towards . repeatedly on the remote).
• The disc information has been stored to the Personal Disc Memory.
, Erase the disc information from the Personal Disc Memory.
Playback sound
skips.
• The recorder is placed where it receives continuous vibration.
, Put the recorder on a stable place.
• A very short track may cause sound to skip.
Sound has a lot of
static.
• Strong magnetism from a television or such device is interfering
with operation.
, Move the recorder away from the source of strong magnetism.
Cannot find the
track marks.
• You pressed X after pressing . or >.
, Press X before turning the jog dial or pressing . or >.
The rechargeable
battery does not
start charging.
The rechargeable
battery cannot be
fully charged.
• The rechargeable battery has been inserted incorrectly or the AC
power adaptor has been connected incorrectly.
, Insert the battery correctly or connect the AC power adaptor
correctly.
• The terminals of the battery charging stand is dirty.
, Clean the terminals with a dry cloth.
The clock loses
time or the display
flashes.
The recording
date was not
stamped onto the
disc.
• The built-in battery for the clock is weak.
, Connect the AC power adaptor to DC IN 3V on the recorder and
the wall outlet to charge the built-in battery. After charging, set
the clock again (page 39). Note that the clock may gain or lose
up to about 2 minutes per month under normal condition.
• The clock is not set.
, Set the clock (page 39).
CD text
information
cannot be
recorded.
• The cable connecting the devices is not an optical cable.
, Use an optical cable to connect the devices.
• The connected portable CD player does not supports CD-TEXT.
, Connect a portable CD player (D-E999, etc.) that supports CD-
TEXT (page 40).
• The inserted CD does not support CD-TEXT.
, Insert a CD that supports CD-TEXT.
Symptom Cause/Solution
