18
Getting started
Charge the rechargeable battery before using. Even if the rechargeable
battery is not charged, you can use the recorder as long as the AC
power adaptor is connected.
1
Insert the rechargeable battery
2
Charge the rechargeable battery.
1 Connect the AC power adaptor to the
battery charging stand and the AC
adaptor to a wall outlet.
2 Place the recorder on the battery
charging stand.
“Charging” flashes, e appears in the
display, and charging starts. When
charging is completed, the battery
indication disappears.
Full charging of a completely
discharged rechargeable battery takes
about 2.5 hours.
3 Remove the recorder from the battery
charging stand.
e
E
Insert the NH-10WM rechargeable
battery minus end first.
Close the lid.Slide OPEN to open the
battery compartment lid.
AC power
adaptor
To DC IN 3V
To a wall outlet
Battery charging stand
(at the bottom)
Attach the connector to the jack firmly.
