49
Connecting to a stereo
system (LINE OUT)
Connect the i/LINE OUT jack of the
recorder to the LINE IN jacks of an
amplifier or a tape player with a line
cable. The output is analog. The recorder
plays the MD digitally and sends analog
signals to the connected equipment.
When connecting a line cable to the i/
LINE OUT jack of the recorder, be sure to
set the “AUDIO OUT” parameter for the
i/LINE OUT jack.
1 Press the jog dial.
2 Turn the dial until “AUDIO OUT”
flashes in the display, and then press
to enter.
3 Turn the jog dial until “LINE OUT”
flashes in the display, and then press
to enter.
Notes
•If the “AUDIO OUT” parameter for the i/
LINE OUT jack is set to “LINE OUT”,
VOLUME +/– or Digital Sound Preset will
not function.
•The “AUDIO OUT” parameter for the i/
LINE OUT jack cannot be set to “LINE OUT”
when the remote control is connected.
•When you connect the headphones/earphones
directly to the recorder, set the “AUDIO
OUT” parameter for the i/LINE OUT jack to
“HeadPhone” in step 3.
to LINE IN
2 phono plugs
L
(white)
Stereo mini-plug
R
(red)
Line cable
to i/LINE OUT
Jog dial
Stereo system,
etc.
