![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/4e/24e33f09-4bab-454c-b550-264c9b6525d6/24e33f09-4bab-454c-b550-264c9b6525d6-bg6.png)
6
Notes on MDs
• Do not open the shutter of the cartridge
to expose the MD. Close immediately if
the shutter opens.
• Never touch the surface of the disc inside.
• Do not subject the discs to heat/high
temperature. Avoid leaving them in parked cars
or on dashboards/rear trays.
Notes on attaching labels
To avoid MDs becoming stuck in the unit;
– Attach the label in a suitable position.
– Remove old labels before putting new ones on.
– Replace labels that are peeling away.
Cleaning
Wipe the surface of the cartridge from time to
time with a soft, dry cloth.
About MD group function
The group function is convenient to locate the
desired tracks within a group from a large
number of tracks, or tracks that have been
recorded in MDLP (LP2/LP4) mode.
Notes on MD group settings
• This unit is MD playback only. For MD
recording and group settings, refer to the
operating instructions of your MD recorder.
• The same group name can be registered more
than twice on the same MD.
• Maximum group number is 99, though the
actual group number depends on your MD
recorder.
• Depending on your MD recorder, MD group
settings may not be available.
MD containing groups
* Groups: set by your MD recorder.
When you insert the MD in this unit, playback
starts automatically and follows track order.
12 456789
10
3
MD
Group2*Group1* Group3*
Track number