– 23 –
KV-J14P2S/J51PF2S
RM-869
Data
range
Initial
data
Standard data Note Device
Item Adjustment
number Item
3A DKS 00–01 01 D/K Stereo enable/disable Other Control
3B MUT 00–01 00 Muting on/off at No. Sync Other Control
3C ABL 00–01 00 Bright ABL Switch Other Control
3D SCM 00–01 00 SECAM Trap active/inactive Other Control
3E FBT 00–01 01 FBT L/S C/M strict/plain Other Control
3F OP0 00–FF 2F Optional Flags 0 (see below) Other Control
40 OP1 00–FF 0F Optional Flags 1 (see below) Other Control
41 OP2 00–FF 00 Optional Flags 2 (see below) Other Control
NOTE
• Standard Data: Those are the standard data values written on the microprocessor. Therefore, the data values of the
modes are stored respectively in the memory.
In case of a device replacement, adjustment by rewriting the data value is necessary for some items.
• 50 ...................... 50 Hz data
• 60 ...................... 60 Hz data
• Standard data listed on the adjustment item table are reference values, therefore it is different for every model.
