![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/7/1e/71e4c7a2-1639-2fa4-b91c-46a45bec025d/71e4c7a2-1639-2fa4-b91c-46a45bec025d-bg16.png)
— 22 —
The following messages are displayed when certain problems are occurring in your system. Take the recommended
actions.
01 E: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.E01
➪
Load the disc magazine properly.
02 E: No disc has been loaded in the disc magazine.E02
➪
Load a disc into the disc magazine.
04 E: No disc has been loaded in the disc magazine.E04
➪
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
➪ Clean the CD and load it correctly.
77 E: The unit is malfunctioning for some reason.E77
➪
Press the reset button on the unit. If the "77 E" code does not disappear, consult your nearest service center.
99 E: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.E99
➪
Check the disc magazine. And then press the reset button on the unit. If the "99 E" code does not disappear, consult your nearest service
center.
0d E: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all
operation.E0d
➪
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will
start playing again.
Troubleshooting guide
English
KDC-CMP59FM/U.S 02.1.29 1:38 PM Page 22