Using the Menu
64
SETUP
b Note
• When [50i/60i SEL] in the (OTHERS) menu is set to 50i, this item is set to [0%]
automatically.
FRAME REC
You can record pictures with a stop-motion animated effect by alternately
recording a few frames and then moving the subject a little. Operate your
camcorder using the Remote Commander to prevent camera shake.
* A picture consists of 5 frames when [50i/60i SEL] is set to 50i, and 6 frames when it is set
to 60i.
b
Note
• When you use frame recording continuously, the remaining tape time will not be indicated
correctly.
• The last scene will be longer than other scenes.
• You cannot record index signals during frame recording.
G0% Select to record in the system at the 0% setup level.
7.5% Select to record in the system at the 7.5% setup level.
GOFF Select to record in the standard recording mode.
ON ( ) Select to record pictures using the FRAME REC function.
1 Select [ON], then press the dial.
2 Press MENU to hide the menu screen.
3 Press REC START/STOP.
A picture* is recorded, and your camcorder enters the
standby mode.
4 Move the subject and repeat step 3.
