4
Chapter 4 Adjustments and Settings for Recording4-76
a) STANDARD
1: INTIAL GAIN 3.5 (equivalent to ENG camcorder)
2: INTIAL GAIN 4.0 LOW (equivalent to EFP camera)
3: INTIAL GAIN 4.0 HIGH (equivalent to EFP camera))
4: INTIAL GAIN 4.0 (equivalent to SMPT-240M)
5: INTIAL GAIN 4.5 (equivalent to ITU-709)
6: INTIAL GAIN 5.0
b) USER
1 to 5: Selects the user gamma table stored in the camcorder.
About the user gamma function
You can create the desired gamma table using a personal computer on which
special software has been installed and load this table into your camcorder via
a Memory Stick.
When a user gamma table is selected, gamma (LEVEL, COARSE or ON/
OFF) and knee (POINT, SLOPE, ON/OFF or AUTO KNEE) or both may
become disabled. This is because the gamma and knee are compulsorily fixed
when creating the gamma curve.
Item
LEVEL
COARSE
TABLE
GAMMA
TEST
Description
Sets the R, G, B, and master gamma
correction curve.
Sets the master gamma correction
curve in terms of individual steps.
Selects the gamma table.
Turns the gamma correction function
on or off.
Selects the test signal.
1: Outputs the analog test signal.
2: Outputs the digital test signal.
OFF: Does not output any test
signal.
Page
GAMMA
Setting
–99~0~99
0.40, 0.45,
0.50
STANDARD
a)
1, 2, 3, 4, 5, 6
USER
b)
1, 2, 3, 4, 5
ON, OFF
1, 2, OFF
