56
GB
The battery pack is nearly used up.
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
No memory card is inserted (p. 24).
When the indicator flashes, there are not
enough free spaces for recording images.
D
e
lete unnecessary images (p. 40), or format
the memory card after storing the images on
o
t
her media (p. 52).
The image data base file may be damaged.
Check the data base file by selecting
[Setup] [
Media Settings] [Repair
Img. DB F.] the recording medium.
The memory card is damaged.
Format the memory card with your camcorder
(p.
52).
Incompatible memory card is inserted (p. 25).
The memory card is write-protected.
Access to the memory card was restricted on
another device.
The amount of lights is not sufficient, so
camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
The recording medium is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
When set to the following, you cannot shoot
photos during movie recording.
[ REC Mode]: [Highest Quality ]
[
Frame Rate]: [60p] (models with the
NTSC color system) or [50p] (models with
the PAL color system)
