A SERVICE OF

logo

Open as PDF
next previous
25
Preparations
Mounting procedure
1
Attach the tripod adaptor to the tripod and secure it
with the screw.
2
Place the camera on the tripod adaptor, and slide
forward it along the groove of the tripod adaptor until
it clicks.
To remove the camera from the tripod adaptor
Hold down the red button and pull the lever in the direction
of the arrow.
If the pin of the tripod adaptor does not return to
its original position
After removing the camera, if the pin of the tripod adaptor
does not return to its original position, hold down the red
button and move the lever in the direction of the arrow to
return the pin to its original position. It is not possible to
mount a camera with the pin not seated.
Tripod adaptor
Platform of the tripod
Lever
Red button
Pin
Original position