90
Troubleshooting (Continued)
The cassette cannot be ejected from the compartment.
• Make sure the power source (battery pack or AC Adaptor) is connected correctly (p. 10).
• Moisture condensation has occurred inside the camcorder (p. 106).
The Cassette Memory indicator or title display does not appear while using a
cassette with the Cassette Memory function.
• This camcorder does not support the Cassette Memory function, so the indicator does not
appear.
The remaining tape indicator is not displayed.
• Set [ REMAINING] to [ON] to always display the remaining tape indicator (p. 72).
The cassette is noisier during rewinding or fast-forwarding.
• When using the AC Adaptor, rewind/fast forward speed increases (compared with battery
operation) and therefore increases noise. This is not a malfunction.
You cannot delete pictures on a “Memory Stick Duo” media.
• The pictures are protected. Release the protect function on your computer, etc.
The recording does not start when you press the REC START/STOP button.
• Slide the POWER switch to CAMERA (p. 20).
• The tape has reached the end. Rewind it, or insert a new cassette.
• Set the write-protect tab of the cassette to REC or insert a new cassette (p. 99).
• The tape is stuck to the drum due to moisture condensation. Remove the cassette and leave
your camcorder for at least 1 hour, then re-insert the cassette (p. 106).
The handle zoom does not work.
• Set the handle zoom speed switch to FIX or VAR (p. 23).
You cannot record on the “Memory Stick Duo” media.
• The “Memory Stick Duo” media is full. Delete unnecessary pictures recorded on the
“Memory Stick Duo” media (p. 46).
• Format the “Memory Stick Duo” media on your camcorder (p. 76) or insert another “Memory
Stick Duo” media (p. 19).
Cassette tapes/“Memory Stick Duo” media
Recording
