120
How to store the battery pack
• If the battery pack is not to be used for a
long time, do the following procedure
once per year to maintain proper function.
1 Fully charge the battery.
2 Discharge on your camera.
3 Remove the battery from your camera
and store it in a dry, cool place.
• To use the battery pack up on your
camera, leave the POWER button to on in
slide show playback mode (page 62) until
the power goes off.
• Always carry and store the battery pack in
the battery case to prevent the battery
terminals from becoming dirty or short
circuited.
Battery life
• The battery life is limited. Battery
capacity decreases little by little as you
use it more and more, and as time passes.
When the battery operating time is
shortened considerably, a probable cause
is that the battery pack has reached the
end of its life. Buy a new battery pack.
• The battery life varies according to how it
is stored and the operating conditions and
environment for each battery pack.
Specifications
xCamera
[System]
Image device
7.66 mm (1/2.4 type) color CCD
Primary color filter
Total pixels number of camera
Approx. 5 255 000 pixels
Effective pixels number of camera
Approx. 5 090 000 pixels
Lens Carl Zeiss Vario-Tessar
3× zoom lens
f = 6.7 – 20.1 mm (38 – 114 mm when
converted to a 35 mm still camera)
F3.5 – 4.4
Exposure control
Automatic exposure, Scene selection
(8 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent, Flash
File format (DCF compliant)
Still images: Exif Ver. 2.2 JPEG
compliant, DPOF compatible
Audio with still image: MPEG1
compliant (Monaural)
Movies: MPEG1 compliant
(Monaural)
Recording media
“Memory Stick Duo”
Flash Recommended distance (ISO set to
Auto):
0.3 m to 1.5 m (11 7/8 inches to
59 1/8 inches) (W)
0.5 m to 1.5 m (19 3/4 inches to
59 1/8 inches) (T)
[Input and Output connectors]
Multi connector
[LCD screen]
LCD panel
6.2 cm (2.5 type) TFT drive
Total number of dots
211 200 (960×220) dots
[General]
Used battery pack
NP-FT1
Power requirements
3.6V
Power consumption (during shooting)
1.6 W
Operating temperature
0°C to +40°C (+32°F to +104°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Dimensions
102.5×60×17.3 mm
(4 1/8×2 3/8×11/16 inches)
(W/H/D, excluding maximum
protrusions)
Mass Approx. 186 g (6.6 oz) (including
battery pack NP-FT1, “Memory Stick
Duo” and wrist strap)
Built-in microphone
Electret condenser microphone
Built-in speaker
Piezo-electric speaker
Exif Print Compatible
PRINT Image Matching II Compatible
PictBridge Compatible
