[189] How to Use Changing settings Setup menu
REC Control (movie)
If you connect the camera to an external recorder/player, you can remotely command the
recorder/player to start/stop recording using the camera.
1. MENU → (Setup) → [HDMI Settings] → [ REC Control] → desired setting.
Menu item details
On:
The camera can send a recording command to an external recorder/player.
The camera is sending a recording command to an external recorder/player.
Off:
The camera is not able to send a command to an external recorder/player to start/stop
recording.
Note
Available for external recorders/players compatible with [ REC Control].
When [ TC Output] is [Off], [ REC Control] is set to [Off].
Even when is displayed, the external recorder/player may not work properly
depending on the settings or status of the recorder/player. Check if the external
recorder/player works properly before use.
[190] How to Use
Changing settings Setup menu
HDMI Audio Out. (movie)
When the camera is connected to an external device such as a television via an HDMI cable
(sold separately), the audio picked up by the camera’s microphone is output to the external
device during movie shooting and standby mode. During shooting, you can check both the
image and sound from the external device.
Standby for movie shooting
This is the state before you start movie shooting by pressing the MOVIE button, after turning
the mode dial to (Movie) and setting the values for shutter speed and aperture. The
icon “STBY” is displayed on the screen.
