102
Icon/item
PRINT MARK
PROTECT
SLIDE SHOW
DELETE ALL
FORMAT
PHOTO SAVE
9PIC PRINT
DATE/TIME
Mode
zOFF
ON
zOFF
ON
——
——
zRETURN
OK
——
zRETURN
SAME
MULTI
MARKED
zOFF
DATE
DAY&TIME
Meaning
To cancel print marks on still images.
To write a print mark on the recorded still
images you want to print out later (p. 152).
Not to protect images.
To protect selected images against accidental
erasure (p. 149).
To play back images in a continuous loop (p. 148).
To delete all the unprotected images (p. 151).
To cancel formatting.
To format an inserted “Memory Stick.”
1. Select FORMAT with the SEL/PUSH EXEC
dial, then press the dial.
2. Turn the SEL/PUSH EXEC
dial to select OK, then press the dial.
3. After “EXECUTE” appears, press the SEL/
PUSH EXEC dial. “FORMATTING” flashes
during formatting. “COMPLETE” appears when
formatting is finished.
To duplicate still images on tape onto “Memory
Stick”(p. 132).
To cancel prints of split screen
To make prints of same split screen (p. 154)
To make prints of different split screen (p. 154)
To make prints of images with print marks in
recording order (p. 154)
To make prints without the recording date and
time
To make prints with the recording date (p. 154)
To make prints with the recording date and time
(p. 154)
POWER
switch
VCR
MEMORY
VCR
MEMORY
MEMORY
MEMORY
MEMORY
VCR
MEMORY
MEMORY
Changing the menu settings
Notes on formatting
•Supplied “Memory Stick”s have been formatted at factory. Formatting with this
camcorder is not required.
•Do not turn the POWER switch or press any button while the display shows
“FORMATTING. “
•You cannot format the “Memory Stick” if the write-protect tab on the “Memory Stick”
is set to LOCK.
•Format the “Memory Stick” when “ FORMAT ERROR” is displayed.
Formatting erases all information on the “Memory Stick”
Check the contents of the “Memory Stick” before formatting.
• Formatting erases sample images on the “Memory Stick.”
• Formatting erases the protected image data on the “Memory Stick.”
Note on PRINT SET
9PIC PRINT and DATE/TIME are displayed only when an external printer (optional) is
connected to the intelligent accessory shoe.
