A SERVICE OF

logo

1716
Using Discs
Storing Discs
Do not store the disc in a location subject to:
–high humidity
–high temperature
–excessive dust
–direct sunlight
Care of Discs
Hold the disc by its edge. Do not touch the surface.
Do not wipe a CD-R disc or CD-RW disc with a cleaner before
recording data. To avoid scratching the recording surface, blow
away dust using an air blower.
Data cannot be recorded if the recording surface is contaminated.
Using DiscsInstalling the Drive Unit into the Computer
Installing the Software
Device Driver: No device drivers are required from Sony to enable
use of the CRX-160S. Instead your SCSI controller and its device
driver must support CD writer devices. This should be checked at
the SCSI controller manufacturers web site.
Authoring Software: To write to a CD authouring software will be
required. There are many varities. Please be sure that the version of
software you are using is compatible with the CRX-160S You
should check this on the software manufacturers web site or at:
http://www.sony.com.au/support/itp