This chapter shows the connectors, controls, and indicator
lights of the drive. For instructions on connecting and
installing the drive to the computer, please consult
“Chapter 3, Installing Your CD-RW Recorder Drive”
located on page 15.
Using the CD-RW Drive
1. Earphone Jack Stereo mini-jack for headphones and
powered speakers.
2. Volume Control Control volume of earphone jack.
This control has no effect on rear panel
audio output.
3. Emergency Eject In case the Eject button isn’t working,
insert and push the end of a small paper
clip into the hole to eject the tray.
Note: Turn off the power before doing this manual ejection.
4.Busy/Write LED The Busy/LED will be flashing while
the CD-RW drive is busy.
LED light indicated CD-RW drive is
busy, when turning power on,
detecting disc activity or doing
reading. LED blinking indicates data
is writing.
5. Disc Tray The user can open or close the disc tray
by pressing the Open/Close button.
CD-RW Recorder User’s Guide 98 CD-RW Recorder User’s Guide
