Playing CDs
12
GB
Creating Your Own Programme
(Programme Play)
You can arrange the order of the tracks on a disc and
create your own programme. The programme can
contain up to 24 tracks.
• CDP-XE530
CHECK
CLEAR ≠ AMS ±
PLAY MODE
·
p
• CDP-XE330
CHECK CLEAR ≠ AMS ±
PLAY MODE ·
p
• CDP-XE530
2
TRACK STEP
MIN SEC
PROGRAM
Playing order
Total playing time
Track number being
programmed
• CDP-XE330
2
MIN SEC
PROGRAM
Total playing time
Track number being
programmed
If you’ve made a mistake
Press CLEAR, then repeat Steps 2 and 3.
4 Repeat Steps 2 and 3 to programme the tracks in
the order you want.
5 Press · to start Programme Play.
To cancel Programme Play
Press PLAY MODE.
When tracks, which aren’t numerically consecutive on
the disc, are programmed consecutively (i.e. 1, 3, 5
etc.)
A one-second access time blank is added between the
tracks.
The programme remains until erased (see page 13) or
until you press §OPEN/CLOSE
The programme you have created remains even after the
Programme Play mode ends or you select another play
mode.
Notes
• The total playing time doesn’t appear in the display when it
exceeds 100 minutes.
• If you programme a track numbered over 24 (or 68 for the
CDP-XE330), “––.––” appears instead of the total playing
time.
• “PROGRAM FULL” (or “FULL” for the CDP-XE330)
appears in the display when you try to add a track to a
programme which already contains 24 tracks.
3 Push ≠ AMS ± to select the track.
• CDP-XE530
Playing order
Total playing time
• CDP-XE330
25
8
TRACK STEP
MIN SEC
PROGRAM
TAPE A
Last programmed track
Programmed tracks
25
8
A
STEP
PROGRAM
25
8
A
MIN SEC
PROGRAM
Last programmed track
Playing order
Programmed tracks
Total playing time
After one second
Creating a programme on the player
1 Press PLAY MODE repeatedly until “PROGRAM”
appers in the display before you start playing.
2 Turn ≠ AMS ± until the track number you
want appears in the display.
