65
GB
Tuning
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
(page 43).
Tip
The tuning scale for direct tuning is shown below.
• FM band 100 kHz
• AM band 10 kHz*
* The AM tuning scale can be changed (page 66).
1 Press AMP.
The receiver can be operated using the
remote.
2 Press MENU.
The menu is displayed on the TV screen.
3 Press V/v repeatedly to select
“ FM” or “ AM,” then press
or b.
The FM or AM menu list appears on the
TV screen.
4 Press V/v to select “Auto
Tuning,” then press .
5 Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 66), or select the preset station
you want (page 67).
2 Press OPTIONS.
The option menu appears.
3 Press V/v to select “FM Mode,” then
press .
4 Press V/v to select “MONO,” then
press .
Tuning
Refer to “Using Network Features”
supplied with these operating
instructions for details on listening to the
Internet radio.
AMP
V/v/b,
OPTIONS
MENU
Numeric
buttons
SHIFT
Tuning into a station
automatically (Auto Tuning)
