55
Useful
Features
Setting One Touch Play,
System Standby and Input Name
When a Sharp product equipped with
Consumer Electronics Control (HDMI CEC) is
connected to the projector with an HDMI cable,
you can use the linked function with HDMI CEC
(“One Touch Play” and “System Standby”).
The CEC function may not work with some
CEC devices. (When the projector is
connected to a non-Sharp product, the CEC
function may not work.)
•
Note
Setting the One-Touch Playback Function
(One Touch Play)
One Touch Play turns on the projector and
selects the input automatically when you turn
on or begin playback on connected HDMI-
compliant Sharp Video Products.
Selectable
items
Description
On This enables One Touch Play.
Off This disables One Touch Play.
When enabling One Touch Play, be sure to
enable the CEC setting on the HDMI-
compliant Sharp Video Products connected
to the projector.
The Economy mode is set to “Off” when One
Touch Play is set to “On”.
In the following cases, One Touch Play is not
enabled.
- When playback is paused
-
When the cooling fan is running (See page 76.)
- When the lamp is warming up (See page
76.)
•
•
•
Note
Setting the System Standby Function
(System Standby)
When you turn off the projector, the HDMI-
compliant video equipment connected to the
projector enters Standby mode.
Selectable
items
Description
On This enables System Standby.
Off This disables System Standby.
■
■
When enabling System Standby, be sure to
enable the CEC setting on the HDMI-
compliant Sharp Video Products connected
to the projector.
•
Note
Setting the Input Terminal Names (Input
Name)
Set the name of the input terminal (up to 14
alphanumerical characters).
1
Press P/R to select “Input
Name” and then press ENTER.
Input name
H D M I 1
HDMI1
Reset
Return
Pict.
SIG
SCR
PRJ-ADJ Net.
? or _ button
Selects a character column.
Ŧ or Ŷ button
Selects a character.
ENTER button
Sets the input terminal name.
2
Press P/R to select “Return” and
then press ENTER to return to
the previous screen.
To return to the previous setting, select
“Reset” and then press ENTER.
When connecting the projector to a Sharp
Video Product with an HDMI cable using an
input mode of HDMI1 or HDMI2 and the linked
function with HDMI CEC (“One Touch Play” or
“System Standby”) works normally, the name
of the connected Sharp Video Product is
automatically captured.
When the input terminal name has been changed
by a user, the changed name is displayed.
To return to the default name, select “Reset”
and press ENTER.
•
•
•
Note
■
•
Menu operation n Page 42
