48
Picture Mode
Contrast 0
0
0
0
Bright
Color
Tint
0Sharp
Standard
Off
Off
Level 2
Off
SEL./ADJ.
RETURN
ENTER
END
Picture Audio SIG SCR PRJ Net.
0
0
Red
Blue
CLR Temp
BrilliantColor
TM
C.M.S.1
C.M.S.2
DNR
Eco+Quiet
Reset
0
1
1
Selecting the Picture Mode
Selectable
items
Description
Standard For standard image
Presentation
Brightens portions of image for more
enhanced presentations.
Movie Gives natural tint to the projected
image.
Game Gives sharpness to the projected
image.
*sRGB For high fi delity reproduction of
images from a computer.
“sRGB” is displayed only when RGB signal is input.
You can set or adjust each item in the “Picture”
menu to your preference. Any changes you make
are retained in memory.
You can also press PICTURE MODE on the
remote control to select the picture mode.
(See page
41.)
*sRGB is an international standard of color
reproduction regulated by the IEC
(International Electrotechnical Commission).
As the fi xed color area has been decided by
the IEC, the images are displayed in a natural
tint based on an original image, when “sRGB”
is selected.
For additional information about the sRGB
function, visit “http://www.srgb.com/”.
You cannot set the items, “Red”, “Blue”, “CLR
Temp”, “Brilliant Color
TM
”, “C.M.S.1” and
“C.M.S.2”, when “sRGB” is selected.
•
Note
•
•
Info
When “sRGB” is selected, the projected image
may become dark, but this does not indicate a
malfunction.
•
2
Adjusting the Image
Adjustment
items
O button Q button
Contrast For less
contrast.
For more
contrast.
Bright For less
brightness.
For more
brightness.
Color*
1
For less color
intensity.
For more color
intensity.
Tint*
1
For making skin
tones purplish.
For making skin
tones greenish.
Sharp For less
sharpness.
For more
sharpness.
Red*
1
For weaker red. For stronger
red.
Blue*
1
For weaker
blue.
For stronger
blue.
BrilliantColor™*
1
*
2
For making the
effect weaker.
For making the
effect stronger.
*1 Not adjustable/selectable when selecting “sRGB”.
*2 BrilliantColor™ uses Texas Instruments'
BrilliantColor™ technology. As the BrilliantColor™
level is increased, the image becomes brighter
while the color reproduction is kept at a high level.
“Color”, “Tint”, “Red”, “Blue”, “BrilliantColor
TM
”
and “CLR Temp” cannot be set when “sRGB”
is selected.
To reset all adjustment items, select “Reset”
and press ENTER.
•
•
Note
Picture Adjustment (“Picture” Menu)
Menu operation n Page 46
