Hint
Hint
•If your language is not shown after
pressing the AUDIO or SUBTITLE/T-
SET button several times, the disc
may not have that language.
However, some discs allow audio lan-
guage or subtitle language setting on
the disc menu. (Operation varies
depending on the discs, so refer to
the manual along with the disc.)
•When “NOT AVAILABLE” appears on
the TV screen, it means no subtitle is
recorded on the scene.
•If you choose a language that has a
3 letter language code, the code will
be displayed every time you change
the subtitle language setting. If you
choose any other languages, ‘---’ will
be displayed instead. (Refer to page
27.)
Hint
Hint
•For DVD-RW (VR mode), Pressing
the AUDIO button cycles the sound
mode through MAIN, SUB, MAIN +
SUB.
•For DVD-RW (VR mode), the discs
recorded in double sound (two lan-
guages ) can be played back in either
sound mode of MAIN, SUB or MAIN
+ SUB.
•The sound mode cannot be changed
during playback of discs not recorded
in double sound.
•Audio language selection cannot be
made during Rapid Play. (Refer to
page 17.)
•Pressing the AUDIO button may not
work on some DVDs with multiple
audio languages (e.g. DVDs which
allow audio language setting on the
disc menu).
•With discs recorded in VR mode,
changing the audio (MAIN, SUB or
MAIN+SUB) is effective only when
using an analogue connection.
Although you may be able to change
the settings of the on-screen display,
it will not affect the sound when using
a digital connection.
Hint
Hint
•If the Virtual Surround setting is “1’’ or
“2’’, the sound mode will be fixed to
STEREO, and cannot be changed.
•Stereo sound mode will not be
changed when playing DTS CD.
