9
BEFORE OPERATING
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
PROCEDURE DISPLAY
1
2
3
STOP/CLEAR
12:30
12:30
Touch Clock pad.
Touch Clock pad again.
Enter the correct time
of day by touching the
numbers in sequence.
1 2 3 0
Clock
Clock
TIME OF
DAY
ENTER
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, will appear in the display.
Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show
SHARP SIMPLY THE BEST
. PRESS CLEAR AND PRESS CLOCK
after
the power is reinstated. If this occurs during cook-
ing, the program will be erased. The time of day will
also be erased. Simply touch Stop/Clear pad and
reset the clock for the correct time of day.
NOTE:
Your oven can be programmed with the
door open except for Start/Touch On and
Minute Plus.
ERROR
• Before operating your new microwave oven make
sure you read and understand this operation
manual completely.
• Before the oven can be used, follow these
procedures:
1. Plug in the oven. Close the door. The oven display
will show
SHARP SIMPLY THE BEST PRESS
. CLEAR AND PRESS CLOCK
.
2. Touch the Stop/Clear pad.
will appear.
3. Set clock.
:
