A SERVICE OF

logo

Open as PDF
next previous
24
E
Basic Operation
Using the touch menu
You can touch the monitor to change input mode, volume, and
other settings.
1. Press the TOUCH MENU button.
TOUCH MENU button
2. Touch the screen to change settings.
INPUT
BOTTOM INPUT TERMINAL
DisplayPort
HDMI1
D-SUB1
SIDE INPUT TERMINAL
HDMI2
HDMI3
D-SUB2
(4) (1) (2) (3)
(1) INPUT (Input mode selection)
Changes the input mode.
Input mode Video Audio
DisplayPort DisplayPort input terminal
*5
HDMI1 HDMI1 input terminal
*1
HDMI2 HDMI2 input terminal
*2
HDMI3 HDMI3 input terminal
*3
D-SUB1 D-sub1 input terminal
*4
D-SUB2 D-sub2 input terminal
• Whentheinputmodeischanged,thetouchpanel
connection also changes. You can set whether the side or
bottom USB port is used in each input mode. (See page
32.)
*1 Select the terminal to be used in HDMI1 of INPUT
SELECT. (See page 31.)
*2 Select the terminal to be used in HDMI2 of INPUT
SELECT. (See page 31.)
*3 Select the terminal to be used in HDMI3 of INPUT
SELECT. (See page 31.)
*4 Select the terminal to be used in D-SUB1 of INPUT
SELECT. (See page 31.)
*5 Select the terminal for AUDIO SELECT which is used for
audio input. (See page 31.)
(2) Volume adjustment
Changes the volume.
15
Mutes the sound.
Touch again to return the sound to the original
volume.
Increases the volume.
Decreases the volume.
(3) Touch action setting
Touch to disable touch action.
Touch again to enable touch action.
TIPS
• Whentheinputmodeischanged,thedisabletouch
action setting is canceled.
• WhenTOUCHOUTPUTINVALIDICONissettoONand
touchactionisdisabled,theTOUCHOUTPUTINVALID
icon appears in the monitor.
• YoucantouchtheTOUCHOUTPUTINVALIDiconinthe
monitor to enable touch action.
• ThepositionoftheTOUCHOUTPUTINVALIDiconcan
be changed. (See page 33.)
• TheTOUCHOUTPUTINVALIDiconappearsevenwhen
a USB cable is not connected.
(4) Exit touch menu
Closes the touch menu.
TIPS
• Thetouchmenucanalsobeusedwiththeremotecontrol
unit.
(1) Hold down
DISPLA
Y
at least 5 seconds.
The touch menu appears.
(2) Select the setting item with
.
(3) Set with
, and press
ENTER
.
- The setting is entered.
- Press
RETURN
to exit the touch menu.