Sharp PNE421P Manual

Open as PDF

next previous

Connecting Peripheral Equipment

Caution

• Besuretoturnoffthemainpowerswitchanddisconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the

equipment to be connected.

• Becarefulnottoconfusetheinputterminalwiththeoutput

terminal when connecting cables. Accidentally reversing

cables connected to the input and output terminals may

cause malfunctions and the other problems.

TIPS

• Imagesmaynotbedisplayedproperlydependingonthe

computer (video card) to be connected.

• Ascreenwith1920x1080resolutionmaynotbedisplayed

correctlyonPCRGB.Inthiscase,checkthesettingsof

your computer (video card) to verify that input signals

conformtospecicationsofthismonitor.(SeeOperation

guide.)

• IfthereisacheckboxtodisableEDIDindisplaycontrol

panel,checkitwhenusingPCRGB.

• UsetheautomaticscreenadjustmentwhenaPCscreen

isdisplayedforthersttimeusingPCD-SUBorPCRGB,

or when the setting of the PC is changed. The screen is

adjusted automatically when SELF ADJUST in the OPTION

menu is set to ON.

• Iftheaudiooutputfromtheplaybackdeviceisconnected

directly to speakers or other devices, the video on the

monitor may appear delayed from the audio portion.

Audio should be played through this monitor by connecting

the playback device to the monitor’s audio input, and

connecting the monitor’s audio output to the speakers or

other devices.

• Theaudioinputterminalsusedineachinputmodeare

factory-set as follows.

Input mode

Audio input terminal

(Factory setting)

PCD-SUB,PCDVI-D,

PCRGB

Audio input terminal

AV DVI-D Audio1 input terminal

AV COMPONENT,

AV S-VIDEO, AV VIDEO

Audio2 input terminal

PC HDMI, AV HDMI PC/AV HDMI input terminal

Connection with a PC or AV equipment

1. PC/AV HDMI input terminal

• UseacommerciallyavailableHDMIcable(conformingto

the HDMI standard) for PC/AV HDMI input terminal.

• SetHDMIofINPUTSELECTontheOPTIONmenu

according to the device to be connected.

• SelecttheaudioinputterminaltobeusedinPCHDMI

or AV HDMI of AUDIO SELECT on the OPTION menu.

WhenHDMIisselected,connectiontotheaudioinput

terminal is unnecessary.

2. PC D-sub input terminal

• WhenthePN-ZB01(optional)isattached,selecttheaudio

inputterminaltobeusedinPCD-SUBofAUDIOSELECT

on the OPTION menu.

3. Audio input terminal

• Useanaudiocablewithoutresistance.

• WhenthePN-ZB01(optional)isattached,settheaudio

input terminal used for each input mode in AUDIO

SELECT on the OPTION menu.

4. Audio output terminals

• Theoutputsoundvariesdependingontheinputmode.

• Thevolumeoftheoutputsoundcanbexedbysetting

AUDIO OUTPUT on the OPTION menu.

• Itisnotpossibletocontrolthesoundoutputfromthe

audio output terminals with the AUDIO menu.

5. RS-232C input terminal

RS-232C output terminal

• YoucancontrolthemonitorfromaPCbyconnectinga

commercially available RS-232 straight cable between

these terminals and the PC.

When the PN-ZB01 (optional)

is attached

1312146

811

7109