Easy to Use Functions
-49
Enlarging a Specific Portion of an Image
Displaying an Enlarged
Portion of an Image
1 Press .
• Enlarges the image.
• Pressing
or enlarges or re-
duces the projected image.
Note
• You can change the location of the
enlarged image using
, ,
or .
• When an image with a resolution
higher than XGA is displayed, “×2”
and “×3” cannot be selected.
2 Press to cancel the opera-
tion, then the magnification
returns to
××
××
×1.
Note
In the following cases, the image will
return to the normal size (×1).
• When the input mode is changed.
• When
has been pressed.
• When the input signal is changed.
• When the input signal resolution
and refresh rate (vertical frequency)
change.
This function allows you to enlarge a specific portion of an image. This is useful when you
want to display a detailed portion of the image.
ENLARGE
(Enlarge/
Reduce)
buttons
×1 ×4 ×9 ×16 ×36 ×64×2 ×3
To enlarge
To reduce
"On-screen Display
buttons
