LOADING PAPER
2-7
2
Loading paper in paper tray 5 (optional large capacity tray
AR-LC6)
The large capacity tray can hold up to 3,500 sheets of A4 size (8-1/2" x 11") SHARP standard paper (80 g/m
2
(20 lbs.)). If you wish to change the paper size, please consult your dealer (the paper size must be changed by a
service technician).
1
Pull the tray out until it stops.
When the tray is in
operation, do not use
excessive force to pull
the tray out. This may
damage the tray.
2
Place the paper in the centre of the paper
table.
The paper stack must
not be higher than the
indicator line (up to
3,500 sheets of SHARP
standard paper (80 g/m
2
(20 lbs.))
If the paper type was
changed, be sure to change the appropriate
settings as explained in "Setting the paper type
and paper size" (See page 2-14).
3
Push the tray firmly all the way into the
machine.
The paper table will
automatically rise to the
paper feed position.
■ Specifications
Specifications are subject to change for improvement without notice.
Name Large capacity tray (AR-LC6)
Paper size A4 (8-1/2" x 11")
Paper weight 60 to 105 g/m
2
(16 to 28 lbs.)
Paper capacity (plain) 3500 sheets (80 g/m
2
(20 lbs.))
Dimensions
376 mm (W) x 546 mm (D) x 518 mm (H)
(14-23/32" (W) x 21-1/2" (D) x 20-13/32" (H))
Power supply Supplied from the main unit
Weight Approximately 28.5 kg (62.9 lbs.)
Overall dimensions when
attached to machine
1347 mm (W) x 679 mm (D)
(53-3/64" (W) x 26-47/64" (D))
