7-36
SYSTEM SETTINGS
Contents
* When a saddle stitch finisher is installed.
Network Settings
X Disabling Deletion of Job Programs Disabled 7-73
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-73
X Disabling of Auto Paper Selection Disabled 7-73
X Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-73
X 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-73
X Quick Scan from Document Glass Enabled 7-73
X Auto Clear Before Copy Job Execution Disabled 7-73
Item Factory default setting Page
■ Network Settings
7-74
● IPv4 Settings DHCP 7-74
● IPv6 Settings Disabled 7-74
● Enable TCP/IP Enabled 7-74
● Enable NetWare Enabled 7-74
● Enable EtherTalk Enabled 7-74
● Enable NetBEUI Enabled 7-74
● Reset the NIC – 7-74
● Ping Command – 7-74
Item Factory default setting Page
