7-35
SYSTEM SETTINGS
Contents
*1 When an automatic document feeder is installed.
*2 When a saddle stitch finisher is installed.
*3 When a finisher (large stacker) is installed.
*4 When a large capacity tray is installed.
*5 When a stand/1 x 500 sheet paper drawer / stand/2 x 500 sheet paper drawer is installed.
*6 When a saddle stitch finisher or finisher is installed.
*7 When a punch module is installed.
Copy Function Settings
X Disabling of Finisher*
6
Disabled 7-70
X Disabling of Offset Disabled 7-70
X Disabling of Stapler*
6
Disabled 7-70
X Disabling of Punch*
7
Disabled 7-70
● Fusing Control Settings 60 - 89g/m
2
(16 - 23 lbs.) 7-70
Item Factory default setting Page
■ Copy Function Settings
7-71
● Initial Status Settings
7-71
X Paper Tray Varies depending on the machine
configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output –
● Other Settings 7-72
X Copy Exposure Adjustment 5 7-72
X Rotation Copy Setting Enabled 7-72
X Add or Change Extra Preset Ratios – 7-72
X Setting a Maximum Number of Copies 999 7-72
X Initial Margin Shift Setting
7-72Side 1 10 mm (1/2")
Side 2 10 mm (1/2")
X Erase Width Adjustment
7-72Edge Clearance Width 10 mm (1/2")
Centre Clearance Width 10 mm (1/2")
X Card Shot Settings
7-72Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
Fit to Page Disabled
X Automatic Saddle Stitch* Enabled 7-72
X Initial Tab Copy Setting 10 mm (1/2") 7-72
Item Factory default setting Page
