8
Menu item Settings (factory default setting appears in bold) Page
16 : RCV REDUCE When a fax is received that is larger that the printing paper,
enable reduction of the fax to the size of the paper to avoid the
fax being cut off.
1 : ON
2 : OFF
62
17 : BEEP LENGTH Set the length of the beep that sounds when fax transmission or
reception ends.
1 : 3 SEC
2 : 1 SEC
3 : NO BEEP
19
18 : RINGER VOLUME Set the volume of the ringer.
1 : OFF
2 : LOW
3 : MIDDLE
4 : HIGH
18
19 : BEEPER VOLUME Set the volume of the beep that sounds when a key is pressed.
1 : OFF
2 : LOW
3 : MIDDLE
4 : HIGH
20
20 : INDEX PRINT Enable printing of a black mark (index) at the top of each
received fax page.
1 : ON
2 : OFF
34
21 : PBX SETTING **
Set this function for pbx setting.
1 : ON
2 : OFF
39
22 : 2-SIDED RX
Print on both sides of the paper when a multi-page fax is received.
1 : ON
2 : OFF
61
23 : TRAY SELECTION
(When the 250-sheet paper
feed unit is installed.)
Set the tray for printing received faxes.
1 : AUTO
2 : TRAY 1
3 : TRAY 2
29
32 : DATE&TIME FORMAT 1 : TIME FORMAT
Select 12-hours or 24-hour format for the time set in the
machine.
1 :12 HOUR
2 : 24 HOUR
15
2 : DATE FORMAT
Set the format of the date in the display and in printouts.
1 :MMDDYYYY
2 : DDMMYYYY
3 : YYYYMMDD
16
** Please note that the PBX SETTING is only available in Germany, France, Denmark, Finland, Iceland, Norway
and Sweden.
For other countries, the parameter "21. PBX SETTING" is replaced by "21. 2-SIDED RX" and followed by
"22. TRAY SELECTION".
