43
Selecting the WSS picture size manually
Option
4:3 mode
The “WSS” signal has 4:3 auto-switching that allows
you to select between “Normal” and “Panorama”.
Go to “Menu” > “Setup” > “Option” > “4:3
mode”.
Item
Normal
Normal range keeping 4:3 or 16:9
aspect ratio.
Panorama
Wide image without side bars.
WSS signal 4:3 screen
4:3 mode “Normal”
4:3 mode
“Panorama”
Terminal setting
Option
Audio select
When using the PC terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (L/R)
jack for analogue audio input.
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Audio select”.
When selecting “HDMI 2” from the “INPUT” menu
Item
HDMI (Digital)
When connecting devices (including a
PC) with a HDMI cable to the HDMI 2
terminal.
HDMI+Analog
When connecting devices (including
a PC) with a DVI/HDMI cable to
the HDMI 2 terminal and inputting
analogue audio signals from the AUDIO
(L/R) jack.
When selecting “PC” from the “INPUT” menu
Item
Video
When connecting devices with an
AV cable to the PC terminal, displays
images without audio.
Video+Audio
When connecting a PC to the PC
terminal, and inputting analogue audio
signals from the AUDIO (L/R) jack.
Skipping specified inputs
Option
Input skip
This setting allows you to skip the SCART, HDMI,
PC, ATV, DTV or SAT input on the input source
selection operation.
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Input skip”.
Setup
Input skip
Terminal setting
[No]
[No]
[No]
[No]
[Yes]
[No]
[No]
[No]
NOTE
• When you select “ATV”, “DTV” or “SAT”, the skip
function works only when using the # button on
the TV.
Useful viewing functions
