Selected item
Off
On
On: Display
Description
The brightness is fi xed at the value set in
“Backlight” (See page 27).
Automatically adjusts
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
26
Basic adjustment settings (Analogue/Digital)
AV MODE selection
The AV MODE function enables you to select appropriate
settings for audio and video to account for the system
environment which can vary due to factors like room
brightness, type of programme watched or the type of
image input from external equipment.
Using AV MODE on the remote control unit
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for ANALOGUE TV
input and DYNAMIC for INPUT1.)
OPC (Optical Picture Control)
setting
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
Using OPC on the remote control unit
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
When the input source is TV, DTV, INPUT1 or 2 terminals (Example)
AV MODE: MOVIE
AV MODE: STANDARD
AV MODE: DYNAMIC
AV MODE: GAME
AV MODE: USER [TV]
AV MODE: DYNAMIC (Fixed)
When the input source is INPUT3, 4 or 5 terminals (Example)
AV MODE: MOVIE
AV MODE: STANDARD
AV MODE: DYNAMIC
AV MODE: GAME
AV MODE: PC
AV MODE: USER [ ]
AV MODE: DYNAMIC (Fixed)
Press OPC to switch the OPC function on and off.
Using OPC on the menu screen
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Picture”.
2
Press
a
/
b
to select “OPC”.
3
Press
c
/
d
to select the desired item, and
then press ENTER.
4
Selected item
STANDARD
MOVIE
GAME
PC
USER
DYNAMIC
(Fixed)
DYNAMIC
Description
For a highly defi ned image in a normally
bright room
For a movie
Lowers image brightness for easier viewing.
For PC. (Available only when inputting an
HDMI or DVI signal.)
Allows the user to customise settings as
desired. You can set the mode for each
input source.
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
For a clear-cut image emphasising high
contrast for sports viewing
Press AV MODE.
• Present AV MODE displays.
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
1
2
46PD7X_en_d.indd 2646PD7X_en_d.indd 26 2007/01/12 16:31:182007/01/12 16:31:18
