Other features
Using PhotoViewer
This TV is equipped with PhotoViewer, allowing you to
view pictures in the standard JPEG format via a USB
stick or a memory card in a card reader. In addition you
can arrange the pictures into a Slideshow.
E
Connecting
Insert a card reader (with a USB cable) or a USB stick
into the USB terminal on the TV (see page 6). Should
you find it difficult to connect a USB cable due to the
TV installation pattern (e.g., wall-mounting), use a USB
extension cable (commercially available.)
NOTE
• Depending on the model of a card reader or USB stick, the
TV may not be able to recognise the contained data.
• Use only alphanumeric characters for naming a Photo
Viewer file.
• Do not disconnect a USB stick from the TV while
transferring pictures, using Slide Show, or when a menu
screen is switching to another.
• Do not connect and disconnect a USB stick from the TV
repeatedly.
Starting PhotoViewer
PhotoViewer starts automatically when a memory card
or USB device with the appropriate data is connected.
The first page of the Photo Overview will be shown.
NOTE
• You cannot display image data in progressive JPEG format.
A memory card or USB device should contain data in the
standard JPEG format.
If a memory device is already inserted and if it is
not detected automatically start PhotoViwer as
follows:
Press MENU and the TV menu screen displays.
Press c/d to select “Extended functions”, and
then press b to move down.
Press a/b to select “PhotoViewer”, and then
press OK.
• If several memory cards are present in the card
reader, a selection menu opens. Press c/d to select
the desired memory card, and confirm with OK.
• When a memory device is inserted, PhotoViewer
may not start automatically. Please start PhotoViewer
using steps 1-3 above.
Exiting PhotoViewer
Press END on the remote control to exit the
PhotoViewer screen or remove the memory card
or USB device.
1
2
3
Watching photos
EXAMPLE
USB 1:\picture_024.jpg\ 38 pictures
View picture
Mark picture
Slide show
scroll (1/3)
Press a/b/c/d to select the picture, press
Pr/s if there are more pages.
Press OK to display the picture in full frame.
✔ Press J or Pr to move to the next image.
✔ Press G or Ps to move to the previous image.
✔ Press END to turn the photo information on/off.
• If “Photo info” is set to “on”, extended information
appears. (Page 25)
✔ Press YELLOW to zoom in on the picture. Zooming
in m2, m4, m8 and original size are possible. In the
zoom mode you can move the picture around with
a/b/c/d. To exit the zoom mode press OK or
H.
✔ Press c/d to rotate the image 90 degrees right/
left. (You have to pause the Slideshow to rotate
pictures.)
✔ Press OK or H to return to the Photo overview
screen.
Opening picture folder
If there is a picture folder within the memory
device, press a/b/c/d to select the folder in
the Photo Overview screen, and then press OK
to open the folder.
USB 1:\HD1PhotoViewer\ 38 pictures
Open folder
Slide show
scroll (1/3)
• The pictures in the folder are displayed.
1
2
24
LC-52HD1E-gb.indd 24LC-52HD1E-gb.indd 24 2008/03/24 15:01:082008/03/24 15:01:08
