![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/b/76/b768e32e-2b63-41ec-80d2-4a75522b49bc/b768e32e-2b63-41ec-80d2-4a75522b49bc-bg1c.png)
27
Useful adjustment settings
Password setting for child lock
(for TV input mode)
Allows you to use a password to protect certain settings
from being accidentally changed.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
Press MENU and the MENU screen displays.
1
2
3
Press a/b to select “Child Lock”, and then
press ENTER.
5
6
Enter the 4-digit number as a password using
0 – 9.
Press a/b to select “Change Password”,
and then press ENTER.
Enter the same 4-digit number as in step 6
to confirm.
7
NOTE
• To view a locked channel you must enter a password.
When you select a locked channel, a password prompt
message pops up.
• When no password is input for 20 seconds after the prompt
message is displayed, the TV goes into standby mode.
Press c/d to select “Setup”.
If you already set the password, enter it here.
Change Password
Channel Setting
Reset
New Password
–––
Reconfirm
––––
–
Change Password
Channel Setting
Reset
New Password
–––
Reconfirm
––––
–
4
––––
Setting a channel
Press a/b/c/d to select the channel that
you wish to apply the Child Lock, and then
press ENTER.
• The Child Lock setting becomes effective only
when the TV is turned off after the Child Lock is
applied.
Press a/b to select “Channel Setting”, and
then press ENTER.
Press a/b to select “Yes”, and then press
ENTER.
Yes
No
Change Password
Channel Setting
Reset
Repeat steps 1 to 4 in Setting a password.
1
2
3
4
NOTE
• As a precautionary measure, make a note of your
password on the back of this operation manual, cut it
out and keep it in a safe place that children cannot
reach.
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Resetting the password
Allows you to reset your password.
Press a/b to select “Reset”, and then press
ENTER.
Press a/b to select “Yes”, and then press
ENTER.
Repeat steps 1 to 4 in Setting a password.
Yes
No
Change Password
Channel Setting
Reset
2
3
1
LC-AW5X_27-32 9/12/06, 10:34 AM27